“The Quantum Remap is one of the most respected remapping brands on the market. At Quantum Tuning we have both the team and the infrastructure to continually develop and improve our product, however just because we are good at what we do doesn’t make us complacent. In addition to our Operations & Technology Centre located in Ickenham, near Uxbridge, we have our Tuning Files Office based in Milton Keynes and our Accounts & Registered Office is near St Austell, in Cornwall.
Our biggest strength is in our people, not just our own staff, but also our great team of over 100 specialist dealers equally dedicated, as we are, to providing a top quality service. In addition to our supplying our own dealer network, we also confidentially supply tuning files to many of the better known tuning companies in the UK, who obviously demand the best. We also have dealers in Australia, South Africa, China, Singapore, France and Portugal. We at Quantum Tuning have a fair, open and honesty communication and ethics policy. We treat everyone fairly and in the same way that we like to be treated ourselves.
Quantum Tuning website: www.quantumtuning.co.uk
Diesel tuning boxes or ‘black boxes’, as they are sometimes known, have been around since the mid nineties when diesel engines started using computerised electronic control units (ECUs) to precisely control fuel delivery. Tuning boxes are an alternative to a vehicle ECU remap and consist of a small electronic box which is either hard-wired or plugged into the vehicle’s fuel system circuitry.
A simple test that can be performed on most vehicles, to check if a black box is a possible option, is to check for the presence of an electronic throttle. By depressing the accelerator pedal with the ignition off, while at the same time observing the engine bay for any movement of linkages or cables connected to the throttle body, it is possible to determine if the throttle control is mechanical or electronic. As a general rule, if there is any throttle body movement, the throttle is cable controlled. If not, then it’s likely the throttle is electronically controlled and therefore a tuning box can be fitted in most cases.
Unlike an ECU re-map, tuning boxes normally increase the engine’s fuel quantity only and in most instances do not increase the engine’s turbo boost pressure. However, due to the way the diesel engine works, each combustion usually takes place in the presence of excess oxygen, meaning that, under most engine speed and load conditions, there’s oxygen available to burn any extra fuel that may be introduced.
Diesel is a very difficult and slow fuel to burn and that’s why diesel engines tend to smoke excessively under hard and fast driving conditions. Adding more diesel into the cylinders does indeed create more power but there comes a point where the extra power also produces extra smoke, especially at high loads and higher engine speeds.
There are many different makes and brands of Tuning Boxes available to fit most vehicles. Some of the first generation types are analogue and simply use a resistor to alter ECU signal voltages. The more expensive second generation boxes are normally digital and some even claim to be fully mappable (which can’t be true unless it monitors engine speed, fuel quantity and engine load).
The Pioneer of one of the first tuning boxes is Gerd Van Aaken, previously of Van Aaken Developments, who is also the developer of the Smart Box, a second generation tuning box now marketed by Cybrand UK. Gerd’s expert advice and technical input has also been invaluable to us during development of our own third generation tuning box. Other popular brand names include The Original Tuning Box, Tunit, Chip Express, BHP Plus Speedhawk, DTUK CRD2 and CRD-T, Synergy, Spider, TDI Tuning, Racechip, TD Performance, to name but a few.
Tuning boxes are sometimes criticised because of how they work; most boxes fool the vehicle’s ECU into increasing diesel fuel rail pressure, with the exception of Steinbaur, whose tuning boxes electronically extend injector opening times, both allowing an increase in fuel quantity. These methods are not ideal since neither make adjustments in the same way a proper ECU re-map does, by taking reference from both engine speed and load.
At CRD Performance, Bolton, we can supply and fit any make and type of tuning box or, if a customer already has a tuning box, we’re more than happy to install that too. The cost of installation will largely depend on installation complexity and time, which in turn will depend on vehicle make, the type of tuning box, ease of installation and also whether or not a rolling road dyno setup is required.
Probably the most advanced third generation diesel tuning box available is The Select-A-Map; this common rail diesel control unit has been developed in-house, of which Eddie Zyla is the Technical Director and a major shareholder. The main difference between the Select-A-Map unit and previous generation tuning boxes is the way in which it controls the diesel by creating a 3D map, using engine speed and load, replicating a proper ECU re-map.
The vehicle pictured utilises the later N57 engine, which can also be found in the BMW 3 Series E90/E91/E92/E93 325d/330d/330xd, the BMW 5 Series F10/F11 530d, the BMW X5 E70 xDrive30d, the BMW X6 E71 xDrive30d, the BMW X3 F25 X3 xDrive30d, the BMW 7 Series F01 740d/740d xDrive, the BMW M550d xDrive and numerous other vehicles. For many vehicles such these, the Select-A-Map presents a good alternative to a remap, especially for vehicles where a remap is impractical or problematic.
For those of you who are technically minded and would like to know more about how the system works, click the link below to either view or download the full operater manual of the Diesel Control ECU.
Diesel Control ECU – Operator Manual |
||||||
[issuu width=400 height=350 shareMenuEnabled=false backgroundColor=%23222222 documentId=130308184136-15bb4610858c4a5692c13040443e542e name=diesel_control_ecu_-_operator_manual username=crdtechnology unit=px v=2] |
|
|
||||||||
Select-A-Map Retail Brochure |
||||||||
[issuu width=420 height=148 shareMenuEnabled=false backgroundColor=%23222222 documentId=120526121616-4f02c5fcc09943bca4599e32e0471087 name=select-a-map_retail_brochure username=crdtechnology unit=px v=2] |
|
|||||||
|
There are many discussions on internet forums centred on what’s best; an ECU re-map or a diesel tuning box. As a supplier of both tuning boxes and ECU remaps, we have little to gain by arguing for or against either technology, preferring instead that the customer makes an informed decision that best suits his/her application and budget.
Customers are welcome to contact us to discuss the options available.
First generation tuning box (from) £85.00 +VAT
Second generation tuning box (from) £295.00 +VAT
Fitting cost between 1 & 2 hours (approx) £70.00 – £140.00 +VAT
Select-A-Map (from) £499.00 +VAT
Rolling Road Dyno Charge (from) £40.00 +VAT